OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
EM converterLED BASIC 204 NiCd/NiMH 50V | 89800560
Properties
_ Non maintained operation _ 1 or 3 h rated duration _ Operating time selectable with plug (duration link) _ Compatible with all dimmable and non-dimmable constant current LED driver (see data sheet, LED driver compatibility) _ 3-pole technology: 2-pole LED module changeover and delayed power switching for the LED driver _ Automatic shutdown of output if LED load is out of range _ Constant power output _ Maximum light output for all LED modules _ Electronic charge system _ Deep discharge protection _ Short-circuit-proof battery connection _ Polarity reversal protection for batteryBatteries
_ High-temperature cells _ NiCd or NiMH batteries _ D, Cs or LA cells _ 4 year design life _ 1 year guarantee _ For battery compatibility refer to data sheet
SR-DA2833P-DA2
* Pricing Available upon Request *
Product Description
The DALI push button coupler SR-DA2833P-DA2 is industry first DALI-2 certified DALI-2 control device with 4 push buttons according to IEC62386-101, IEC62386-103 and IEC62386-301. This coupler enables to integrate existing push button switches into DALI circuit and convert the switches into DALI input device. The coupler supports 4 push button instances. It is suitable for integration and in combination with DALI-2 compliant central control units. The push button device is multimaster capable, multiple modules can be installed on the DALI- line. The DALI-2 input device is DALI bus powered, no extra power supply required. It is easily configurable via DALI-2 compliant central controller USB interface.
This DALI push button coupler can be easily installed into existing 55mm wall boxes behind existing push button switches.
Driver LCA 25W 350–1050mA one4all SC PRE 25W 28000675 TRIDONIC
premium series
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 350 – 1,050 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
- Max. output power 25 W
- Up to 90 % efficiency
- Power input on stand-by < 0.15 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LC 17W 250–700mA bDW SC PRE2 | 28002412
Product description
- NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
- Dimmable built-in constant current LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Forms automatically a wireless communication network with up to 250 nodes
- Adjustable output current between 250 and 700 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 17 W
- Up to 86 % efficiency
- Power input on stand-by < 0.35 W
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Housing properties
- Casing: polycarbonate, white
- Type of protection IP20
Interfaces
- basicDIM Wireless
- ready2mains (configuration via mains)
- Terminal blocks: 45° push terminals
Functions
- Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2)
- Constant light output function (CLO)
- Power-up fading at AC
- Switch off the driver with fade2zero
- Configurable via ready2mains
- Service monitor to log certain events
- Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
- Intelligent Voltage Guard (overvoltage and undervoltage monitoring)
- Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
- Application-oriented operating window for maximum compatibility
- Best energy savings due to low stand-by losses and high efficiency
- Flexible configuration via basicDIM Wireless, ready2mains and I-SELECT 2
Typical applications
- For linear/area lighting in office applications
SR-2400RB-NF-DIM
* Pricing Available upon Request *
Product Description
The SR-2400RB-NF-DIM is a newly released DALI MCU with DALI output for dimming of luminaires or transformers with DALI interface. Without knob and front plate, the DALI MCU is designed with a built-in DALI power supply with 100-240VAC wide input which can power DALI bus while connected to AC mains. While not connected to AC mains, the DALI rotary dimmer can be powered by DALI bus. The DALI manual control unit is updated with a standard 4mm diameter rotary axis that is perfect to use in Europe. Each MCU can power up to 50 DALI ECGs with max. 100mA DALI output. Maximum 2 active DALI MCUs powered by AC mains and 2 passive MCUs powered by DALI bus can connect to DALI bus and control up to 100 DALI ECGs for multiple control points. Dimming solutions are easy and reliable, no DALI addressing required. The manual control unit can save current brightness as scene and remember last scene/brightness when turn on next time. Double click enables users to adjust the brightness to 100%. Compatible with common European size frames and accessories, the DALI manual control unit is easy to install.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS