OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Multi-addresses PRO DALI DT8 LED Controller SR-2309Pro-5C
* Pricing Available upon Request *
Product Description
SR-2309PRO-5C is a 7 in 1 professional multi-addresses enabled DALI DT8 control gear which is compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011. It is DALI DT8 device with built-in DALI-2 interface. Multi addresses are enabled in this control gear, which means it integrates multi DALI DT8 devices in on control gear. It can be set as single address type or multi-addresses type. The combination of device types can be configured with the buttons and display, and total 7 combinations available: Tc, RGBWAF, XY, 2*Tc, XY+Tc, RGB+Tc, XY+W (DT6).
This control gear is designed with 5 channels PWM output, which enables to control tunable white LEDs, RGB LEDs, RGBW LEDs, RGB+tunable white LEDs depending on the device type configured. One control gear is enough to meet all requirements. This control gear is innovative to be compatible with universal DALI systems, whatever DALI DT8 device types a DALI system support, this control gear supported all DALI DT8 device types.
DALI address can be freely set using the buttons and digital display even without a DALI master controller.
This control gear also supports push dim to control not only brightness but also color temperature and RGB colors even if there is no DALI signal.
Driver LC 7W 350mA fixC pc SR SNC2 7W 28003348 TRIDONIC
essence series
Product description
- Dimmable constant current LED driver (SELV)
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- Dimmable via leading edge and trailing edge phase dimmers
- Dimming range 5 to 100 % (depending on dimmer)
- For luminaires with F or M and MM as per EN 60598, VDE 0710 and VDE 0711
- Max. output power 7 W
- Output current 350 mA
- Nominal lifetime up to 50,000 h
- 5 years guarantee
60X60-TR-28002342
key Features
Color temperatures 3,000, 4,000 and 6,500 K • Two luminous flux range variants 2,800 or 3,800 lm • Efficacy of the module up to 120 lm/W • High colour rendering index CRI > 80 • Small colour tolerance MacAdam 41 • Small luminous flux tolerances • UGR < 19 Mechanical properties • Module dimension 595 x 595 mm and 620 x 620 mm System solution • LED system solution with outstanding system efficacy up to 101 lm/W
BA-TR-22185147
key Features
Mains voltage range 220 – 240 V AC  voltage range 198 – 264 V DC voltage range 176 – 280 V(Lamp start ≥ 198 V DC)  Mains frequency 0 / 50 / 60 Hz  Overvoltage protection 320 V AC, 1 h Defined warm start ≤ 1.5 s  Operating frequency ≥ 39.5 kHz  Type of protection : IP20
Driver LC 10W 150–400mA bDW SC PRE2 | 28002411
Product description
• NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance) • Dimmable built-in constant current LED driver • Can be either used build-in or independent with clip-on strain-relief (see accessory) • Forms automatically a wireless communication network with up to 250 nodes • Dimming range 1 – 100 % • For luminaires of protection class I and protection class II • Adjustable output current between 150 and 400 mA via ready2mains™ Programmer or I-SELECT 2 plugs • Max. output power 10 W • Up to 82 % efficiency • Power input on stand-by < 0.35 W • Nominal lifetime up to 100,000 h • 5 years guarantee (conditions at www.tridonic.com)Housing properties
• Casing: polycarbonate, white • Type of protection IP20Interfaces
• basicDIM Wireless • ready2mains™ (configuration via mains) • Terminal blocks: 45° push terminalsFunctions
• Adjustable output current in 1-mA-steps (ready2mains™, I-SELECT 2) • Constant light output function (CLO) • Power-up fading at AC • Switch off the Driver with fade2zero • Configurable via ready2mains™ • Service monitor to log certain events • Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) • Suitable for emergency escape lighting systems acc. to EN 50172LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS