OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LCI 35 W 350/500/700/1050 mA TEC C | 87500192
Product description
• Fixed output built-in LED Driver • Constant current LED Driver • Output current 350, 500, 700 or 1,050 mA • Max. output power 35 W • Nominal life-time up to 50,000 h • For luminaires of protection class I and protection class II • Temperature protection as per EN 61347-2-13 C5e • 5-year guarantee (conditions at www.tridonic.com)Properties
• Casing: polycarbonat, white • Type of protection IP20Functions
• Overtemperature protection • Overload protection • Short-circuit protection • No-load protection
SR-SV9030A-PIR-V 0-1 OV BLE Fixture-Integrated PIR Sensor Controller | 70300025
Product Description
ENERGY SAVINGS
• Low/High-end trimming • Daylight harvesting • Occupancy/Vacancy detection • Auto and advanced demand response programs • Time-of-Day dimming schedule • Energy monitoringCOMFORT & CONVENIENCE
• Advanced occupancy detections • Light-level stability • Configurable dim-and-linger occupancy • Personalized setting profile • Work with kinetic switch keypad and dimmer wallstation • Multi-scenes controlSENSING
• Mounting height: 3m • Recommended mounting height: 2.5m • Detection area diameter: 5m@2.5mENVIRONMENT AND APPROBATION
• Operating temperature: 0° C to 45° C • Agency approbations: CE/Ro HS/UL Coming soon • Warranty: 5 years
Multi-addresses PRO DALI DT8 LED Controller SR-2309Pro-5C
* Pricing Available upon Request *
Product Description
SR-2309PRO-5C is a 7 in 1 professional multi-addresses enabled DALI DT8 control gear which is compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011. It is DALI DT8 device with built-in DALI-2 interface. Multi addresses are enabled in this control gear, which means it integrates multi DALI DT8 devices in on control gear. It can be set as single address type or multi-addresses type. The combination of device types can be configured with the buttons and display, and total 7 combinations available: Tc, RGBWAF, XY, 2*Tc, XY+Tc, RGB+Tc, XY+W (DT6).
This control gear is designed with 5 channels PWM output, which enables to control tunable white LEDs, RGB LEDs, RGBW LEDs, RGB+tunable white LEDs depending on the device type configured. One control gear is enough to meet all requirements. This control gear is innovative to be compatible with universal DALI systems, whatever DALI DT8 device types a DALI system support, this control gear supported all DALI DT8 device types.
DALI address can be freely set using the buttons and digital display even without a DALI master controller.
This control gear also supports push dim to control not only brightness but also color temperature and RGB colors even if there is no DALI signal.
Driver LCBI 20W 350mA PHASE-CUT/1–10V SR 20W 87500276 TRIDONIC
advanced series
Product description- Independent dimmable LED driver
- Constant current LED driver
- Output current 350 or 500 mA
- Output power 19 W
- Nominal lifetime up to 50,000 h
- SELV
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- 5 years guarantee
COB-Cree 2520
* Pricing Available upon Request *
Product Description
The XLamp® CXA2520 LED array expands
Cree’s family of high‑flux, multi‑die
arrays, offering high performance in an
easy-to-use platform. With XLamp LED
lighting‑class reliability, the CXA2520’s
uniform emitting surface enables both
directional and non‑directional lighting
applications and luminaire designs.
Available in 2-step, 3‑step and 4-step
color consistency, and featuring a
19‑mm optical source, the CXA2520
brings new levels of flux and efficacy to
this form factor.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS