Driver LC 17W 250–700mA bDW SC PRE2 | 28002412
AED0.00
Product description
- NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
- Dimmable built-in constant current LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Forms automatically a wireless communication network with up to 250 nodes
- Adjustable output current between 250 and 700 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 17 W
- Up to 86 % efficiency
- Power input on stand-by < 0.35 W
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Housing properties
- Casing: polycarbonate, white
- Type of protection IP20
Interfaces
- basicDIM Wireless
- ready2mains (configuration via mains)
- Terminal blocks: 45° push terminals
Functions
- Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2)
- Constant light output function (CLO)
- Power-up fading at AC
- Switch off the driver with fade2zero
- Configurable via ready2mains
- Service monitor to log certain events
- Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
- Intelligent Voltage Guard (overvoltage and undervoltage monitoring)
- Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
- Application-oriented operating window for maximum compatibility
- Best energy savings due to low stand-by losses and high efficiency
- Flexible configuration via basicDIM Wireless, ready2mains and I-SELECT 2
Typical applications
- For linear/area lighting in office applications
Description
Technical data
- Rated supply voltage 220 – 240 V
- Input voltage, AC 198 – 264 V
- Input voltage, DC 176 – 280 V
- Mains frequency 0 / 50 / 60 Hz
- Overvoltage protection 320 V AC, 48 h
- current (at 230 V, 50 Hz, full load)1 2 65 – 95 mA
- current (220 V, 0 Hz, full load, 15 %
- dimming level)2 15 – 25 mA
- Leakage current (at 230 V, 50 Hz, full load)1 2 < 700 µA
- input power 22.5 W
- efficiency (at 230 V / 50 Hz / full load)2 86 %
- λ (at 230 V, 50 Hz, full load)1 0.96
- power consumption on stand-by < 0.35 W
- input current in no-load operation 12.3 mA
- input power in no-load operation 0.35 W
- In-rush current (peak / duration) 20 A / 140 µs
- THD (at 230 V, 50 Hz, full load)1 < 3 %
- Starting time (at 230 V, 50 Hz, full load)1 < 0.7 s
- Starting time (DC mode) < 0.4 s
- Switchover time (AC/DC)6 < 0.4 s
- Turn off time (at 230 V, 50 Hz, full load) < 30 ms
- Output current tolerance1 5 ± 3 %
- output current peak (non-repetitive) ≤ output current + 40 %
- Output LF current ripple (< 120 Hz) ± 5 %
- Output PstLM (at full load) ≤ 1
- Output SVM (at full load) ≤ 0.4
- output voltage (no-load voltage) 60 V
- Dimming range 1 – 100 %
- Mains surge capability (between L – N) 1 kV
- Mains surge capability (between L/N – PE) 2 kV
- Surge voltage at output side (against PE) < 500 V
- Type of protection IP20
- Radio transceiver operating frequencies 2.4 – 2.483 GHz
- output power radio transceiver (E.R.I.P.)7 < +20 dBm
- Lifetime up to 100,000 h
- Guarantee (conditions at www.tridonic.com) 5 years
- Dimensions L x W x H 130 x 43 x 30 mm
Reviews (0)
Shipping & Delivery
Data Sheet
Related products
Driver LC 60W 24V one4all lp PRE 60W 28003521 TRIDONIC
premium series 24 V – dimmable (IP20) Product description
- NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
- Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
- one4all interface enables different dimming options
- Dimming range 1 to 100 %
- No additional external dimmer is needed
- Suitable for emergency escape lighting systems acc. to EN 50172
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LC 75W 250–550mA 1-10V lp EXC 75W 28001982 TRIDONIC
excite 1–10V non-SELV series
Product description
- Constant current LED driver for luminaire installation
- Dimmable via 1 ... 10 V interface
- Dimming range 10 – 100 % (Depending on load, for details refer to chapter 4.7 Dimming in data sheet.)
- For luminaires of protection class I and protection class II
- Adjustable output current between 250 and 550 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 75 W
- Up to 94 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LCA 75W 350–1050mA one4all lp PRE 75W 28000659 TRIDONIC
premium series non-SELV
Product description- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 350 – 1,050 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
- Max. output power 75 W
- Up to 92 % efficiency
- Power input on stand-by < 0.16 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LCBI 10W 180mA PHASE-CUT/1–10V lp 10W 87500282 TRIDONIC
advanced series
Product description
- Dimmable built-in constant current LED driver
- Constant current LED driver
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- SELV
- Output current 180, 350 or 500 mA
- Output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LCBI 10W 500mA PHASE-CUT/1–10V lp 10W 87500284 TRIDONIC
advanced series
Product description
- Dimmable built-in constant current LED driver
- Constant current LED driver
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- SELV
- Output current 180, 350 or 500 mA
- Output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LCBI 20W 500mA PHASE-CUT/1–10V SR 20W 87500277 TRIDONIC
advanced series
Product description
- Independent dimmable LED driver
- Constant current LED driver
- Output current 350 or 500 mA
- Output power 19 W
- Nominal lifetime up to 50,000 h
- SELV
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- 5 years guarantee
Reviews
There are no reviews yet.