BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
SALE PRODUCTS
Driver LCA 100W 24V one4all lp PRE 100W 28001436 TRIDONIC
AED0.00
premium series 24 V â dimmable (IP20)
Product description
- NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
- Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
- One4all interface and ready2mains enable different dimming options
- Dimming range 1 to 100 %
- No additional external dimmer is needed
- Suitable for emergency escape lighting systems acc. to EN 50172
- Nominal lifetime up to 50,000 h
- 5 years guarantee
SP-SKD-38D DARK00 LENSE
AED0.00
Driver LC 50W 1200mA fixC SC SNC2 50W 87500766 TRIDONIC
AED0.00
essence series
Product description
- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 1,200 mA
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LC 10W 250mA fixC pc SR SNC2 10W 28003344 TRIDONIC
AED0.00
essence series
Product description- Dimmable constant current LED driver (SELV)
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- Dimmable via leading edge and trailing edge phase dimmers
- Dimming range 5 to 100 % (depending on dimmer)
- For luminaires with F or M and MM as per EN 60598, VDE 0710 and VDE 0711
- Max. output power 10.5 W
- Output current 250 mA
- Nominal lifetime up to 50,000 h
- 5 years guarantee
DALI WT LED Controller for magnet Track Light SRP-2309-MT-48CCT
* Pricing Available upon Request *
Product Description
With super-slim design, this DALI DT8 tunable white LED controller for magnet track light is specially devised for magnet track light and linear lighting. Magnet absorption installation application ensures no high frequency interference sound. This controller has DC48V input, with max. output power 30W total. Equipped with 2 channels 100-700mA constant current output, dips are used to select multi operation current. This device has deep and smooth dimming to 0.1%, without flicker. It is in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011. With built-in DALI-2 interface, this DALI DT8 device controls Warm White and Cool White output via a single DALI address. Besides, it enables Dimming and Color Temperature Adjustment, and supports DT8 device commands, compatible with DALI masters that support DT8 commands. This controller can be configurated via DALI master USB interface. Its waterproof grade is IP20, with 5-year warranty.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS