SR-SBP2801K4-BLE
* Pricing Available upon Request *
Product Description
SR-SBP2801-BLE enables the realization of energy harvesting wireless switches for lighting, build- ing or industrial automation control systems using Bluetooth® low energy technology.
SR-SBP2801-BLE is mechanically compatible with existing switch elements enabling quick integration into a wide range of designs. Key applications are wall-mounted or portable switches either with up to two rockers or up to four push buttons.
SR-SBP2801-BLE pushbutton transmitters are self-powered (no batteries) and fully maintenance- free. They can therefore be used in all environments including locations that are difficult to reach or within hermetically sealed housings. The required energy is generated by an electro-dynamic energy transducer actuated by an energy bow located on the left and right of the module. This energy bow which can be pushed from outside the module by an appro- priate pushbutton or switch rocker.
When the energy bow is pushed down or released, electrical energy is created and a radio telegram according to the Bluetooth® low energy standard is transmitted. This radio telegram transmits the status of all four contact nipples when the energy bow was pushed down or released. SR-SBP2801-BLE radio telegrams are protected with AES-128 security based on a device-unique private key.
SR-SBP2801K4-DIM-G2
Key Features
- DIM wall remote based on RF+Bluetooth Mesh
- Self-powered wall remote, no battery replacement & re-installation costs
- No wires, no batteries. no limits Ultra long lifetime, more than   1 million times pushing
- Easy & quick pairing to the RF+Bluetooth receivers by simply pushing the buttons
- Enables to control 2 zones of receivers
- Mesh network for further control distance. receivers can transmit signal to each other
- 2.4 GHz global operation The controlled receiver status can be quickly synchronized to the smart APP
- Transmission range between every two neighbor devices up to 30m
- Each receiver can be paired to max. 8 remote controls
- Enables to control universal DIM RF+Bluetooth light devices
- Standard size. compatible with existing US size frame
SR-SV9030A-MW-V 0-1 OV BLE Ceiling Mounted Microwave Sensor Controller
Product Description
Energy Saving
• Low/High-end trimming • Daylight harvesting • Occupancy/Vacancy detection • Auto and advanced demand response programs • Time-of-Day dimming schedule • Energy monitoringCOMFORT & CONVENIENCE
• Advanced occupancy detections Light-level stability • Configurable dim-and-linger occupancy • Personalized setting profile • Work with kinetic switch keypad and dimmer wall station Multi-scenes controlSENSING
• Testing height: 2.5m • Detection area diameter: 12m@ 2.5m heightENVIRONMENT AND APPROBATION
• Operating temperature: -20° C to 55° C • Agency approbations: CE/Ro HS/UL Com ming soon ... • Warranty: 5 years
SR-SV9030A-PIR-D
SR-SV9030A-PIR-V 0-1 OV BLE Fixture-Integrated PIR Sensor Controller | 70300025
Product Description
ENERGY SAVINGS
• Low/High-end trimming • Daylight harvesting • Occupancy/Vacancy detection • Auto and advanced demand response programs • Time-of-Day dimming schedule • Energy monitoringCOMFORT & CONVENIENCE
• Advanced occupancy detections • Light-level stability • Configurable dim-and-linger occupancy • Personalized setting profile • Work with kinetic switch keypad and dimmer wallstation • Multi-scenes controlSENSING
• Mounting height: 3m • Recommended mounting height: 2.5m • Detection area diameter: 5m@2.5mENVIRONMENT AND APPROBATION
• Operating temperature: 0° C to 45° C • Agency approbations: CE/Ro HS/UL Coming soon • Warranty: 5 years
SRP-2305-9CC350-700
* Pricing Available upon Request *
Product Description
This 10W DALI DT6 LED Driver is in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, and compatible with universal DALI masters that support DT6 commands. With built-in DALI-2/Push interface, this DALI DT6 device is endowed with high power factor and efficiency. This dimmable driver has maximum output power of 10W. With 1 channel 350~700mA constant current output, it is selected by DIP switch. With class Ⅱ power supply and full isolated plastic case, this driver can switch and dim LED lighting fixtures. It features hybrid (PWM+CCR)  dimming, in tandem with smooth and deep dimming to 0.1%. Besides, it has error report function. Its protection grade is IP20, which is suitable for indoor LED lighting applications, with 5-year warranty.
SRP-2309-12CCT100-700 PWM
key Features
In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2.IEC 62386-209:2011 • Dimmable LED driver. Max. output power 12W • PWM dimming, smooth and deep dimming • IP20 rating, suitable for indoor LED lighting applications • High power factor and efficiency • Built-in DALI-2/Push interface, DALI DT8 device • 5 years warranty • To switch and dim Tunable White LED lighting fixtures • Compatible with universal DALI masters that support DT8 commands • Error report function • 2 channel 100~700mA constant current output, select by DIP switch • Class Ⅱ power supply, full
SRP-2309-24-100LCVT
* Pricing Available upon Request *
Product Description
This 100W DALI DT8 Dimmable LED Driver is in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011, and compatible with universal DALI masters that support DT8 commands. With built-in DALI-2 interface, this DALI DT8 device is controlled via a single DALI address. Moreover, this device is equipped with 2-channel DC 24V constant voltage output and high power factor and efficiency. Its dimming method is PWM, with smooth and deep dimming to 0.1%. Besides, this driver has error report function, and supports DALI DT8 Tc type. Its protection grade is IP20, which is suitable for indoor LED lighting applications, with 5-year warranty.
SRP-2309-24-150LCVT
* Pricing Available upon Request *
Product Description
With the maximum output power of 150W and 2-channel 24VDC constant voltage output, this dimmable LED driver has built-in DALI-2 interface and high power factor and efficiency. Each device is controlled via a single DALI address. PWM dimming allows it to smoothly and deeply dim to 0.1%. This device is compatible with universal DALI masters that support DT8 commands, has error report function and can support DT8 commands. Besides, this driver is suitable for indoor LED lighting applications with 5-year warranty.
SRP-TRIAC-10CC
* Pricing Available upon Request *
Product Description
SRP-TRIAC-10CC is an ENEC approved 10W triac dimmable LED driver with 1 channel constant current output and adjustable current from 200mA to 350mA by DIP switches, which enables it to be suitable for different LED lights. It is designed with 200-240VAC input. The triac dimming driver is designed with DALI, Push, Triac, 0/1-10V 4 dimming interfaces in 1, which enables it to work with different control systems. The LED driver adopts amplitude dimming output instead of PWM output to ensure real flicker free. Power factor of the driver can be over 0.9 and efficiency is higher than 83%. It enables smooth and deep dimming to 1% without flickering and buzzing noise. 1 DALI address can be automatically assigned by DALI masters. Complying with IEC 62386-101, IEC 62386-102, IEC 62386-207, this DALI driver is compatible with most DALI systems in the market. The Triac dimming driver can be compatible with universal Triac dimmers. While selecting 0/1-10V interface, it is compatible with universal 0/1-10V dimmers.
SRPC-2309PRO-24-200CVF
* Pricing Available upon Request *
Product Description
With the maximum output power of 200W, this 4-in-1 200W DALI DT8 LED Driver is in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011. Featured with built-in DALI-2 interface and 4-channel 12VDC/24VDC constant voltage output, this device has a full isolated metal casing. Its PF is greater than 0.98 and its efficiency is greater than 93%. For this LED driver, 4 universal device types: primary N, Tc, XY coordinate and RGBW, can be set by the buttons. Besides, only 1 address is required to control 4 outputs separately under primary N mode. This driver is suitable for indoor LED lighting applications with 5-year warranty.