DOW-SKD-LD-2414T WH LEDDOMAIN
DOW-SKD-LD-SD-3343
DR-LD-100W-24D-IP20
Features
- Constant voltage output design.
- 200~240 AC input.
- Encapsulated with IP20 level.
- Withstand 300VAC surge input for 5 seconds.
- Protections: Short circuit / Overload / Over voltage.
- Cooling by free air convection.
- Phase, 0-10V, 1-10V dimming options.
- 100% full load burn-in test.
- High cost-performance, high reliability.
- Suitable for LED related fixture or appliance.
DR-LD-150W-24D-IP67-PHD
Features
- Constant voltage output design.
- 200~240 AC input.
- Encapsulated with IP65 level.
- Withstand 300VAC surge input for 5 seconds.
- Protections: Short circuit / Overload / Over voltage.
- Cooling by free air convection.
- Phase, 0-10V, 1-10V dimming options.
- 100% full load burn-in test.
- High cost-performance, high reliability.
- Suitable for LED related fixture or appliance.
Driver LC 100W 24V 0-10V lp SNC UNV 100W 28002852 TRIDONIC
Driver LC 100W 24V IP67 L EXC UNV 100W 28003297 TRIDONIC
Driver LC 100W 250–700mA flexC lp EXC 100W 28000690 TRIDONIC
excite series non-SELV Product description
- Constant current LED driver for luminaire installation
- For luminaires of protection class I and protection class II
- Adjustable output current between 250 and 700 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 100 W
- Up to 95 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LC 10W 150–400mA bDW SC PRE2 | 28002411
Product description
• NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance) • Dimmable built-in constant current LED driver • Can be either used build-in or independent with clip-on strain-relief (see accessory) • Forms automatically a wireless communication network with up to 250 nodes • Dimming range 1 – 100 % • For luminaires of protection class I and protection class II • Adjustable output current between 150 and 400 mA via ready2mains™ Programmer or I-SELECT 2 plugs • Max. output power 10 W • Up to 82 % efficiency • Power input on stand-by < 0.35 W • Nominal lifetime up to 100,000 h • 5 years guarantee (conditions at www.tridonic.com)Housing properties
• Casing: polycarbonate, white • Type of protection IP20Interfaces
• basicDIM Wireless • ready2mains™ (configuration via mains) • Terminal blocks: 45° push terminalsFunctions
• Adjustable output current in 1-mA-steps (ready2mains™, I-SELECT 2) • Constant light output function (CLO) • Power-up fading at AC • Switch off the Driver with fade2zero • Configurable via ready2mains™ • Service monitor to log certain events • Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) • Suitable for emergency escape lighting systems acc. to EN 50172
Driver LC 10W 150–400mA flexC C EXC10W 28000692 TRIDONIC
Driver LC 10W 150–400mA flexC SC EXC 10W 28000704 TRIDONIC
excite series
Product description
- Constant current LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Adjustable output current between 150 and 400 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 10 W
- Up to 83 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LC 10W 250/350/500/700mA fixC SR SNC 10W 87500580 TRIDONIC
essence series
Product description
- Independent LED driver with cable clamps
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250, 350, 500 or 700 mA
- Max. output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee