BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
DIN Rail DALI Master Controller SR-2300-USB | 70030140
AED0.00
key Features
- Central controller of a DALI system to control DALI control gears on the DALI
- Designed with built-in 100mA DAL/ PS to power the DALI circuit
-  Dip switches can be used to disable or enable DALI PS
- Once built-in DALI PS is disabled, the master controller can be connected to an eternal DALI PS
- Enables to automatically assign and manage addresses to up to 64 control gears
- Enables to control up to 64 control gears with 64 addresses
- Â Supports 5 DAL/ control gear device types: DT6, DT8 Tc, DT8 XY coordinate, 0T2 RGBINA, DT7 Switching actuator
- Â Supports DALI-2 type 301 push button input devices
- Enables to set up to 16 DALI scenes for each control gear
- Â Enables to assign each control gear to up to 16 DALE groups
- Enables to set up to 256 timer tasks
- Â Enables to set up to 4 types brightness fade and color fade cycle schedules
- Enables to set up to 4 Bionic color temperature schedules for the (CT control gears to mimic natural light change during 24 hours of a day (Human Centric Lighting)
- Â Designed with PC configuration software toot, enables to configure and read parameters of the master and control gears
- Â Can be easily mounted on 35mm standard DIN rail
DUAL WHITE 14.4W/M LED STRIP LIGHT
AED0.00
Product description
- Wattage: 14.4W/M
- SMD5050
- Lumens: 926lm/m
- Voltage: DC24V
- LED Qty: 60leds/m
- Mains Frequency: 50/60 Hz
- CCT: 3000K + 6000K
- CRI: >80
- Beam Angle: 120°
- Power Factor: 0.9
- IP Rating: IP20
- Dimension: 5000x10x2.5mm
- With 3M adhesive tape back, easy for installation
- Options: ON/OFF, 0-10/DALI Dimmable
- Operating Temperature: -20°C to + 50°C
- Lifetime: 50,000 Hrs.
- Certifications: CE, RoHS
SRP-TRIAC-10CC
AED0.00
* Pricing Available upon Request *
Product Description
SRP-TRIAC-10CC is an ENEC approved 10W triac dimmable LED driver with 1 channel constant current output and adjustable current from 200mA to 350mA by DIP switches, which enables it to be suitable for different LED lights. It is designed with 200-240VAC input. The triac dimming driver is designed with DALI, Push, Triac, 0/1-10V 4 dimming interfaces in 1, which enables it to work with different control systems. The LED driver adopts amplitude dimming output instead of PWM output to ensure real flicker free. Power factor of the driver can be over 0.9 and efficiency is higher than 83%. It enables smooth and deep dimming to 1% without flickering and buzzing noise. 1 DALI address can be automatically assigned by DALI masters. Complying with IEC 62386-101, IEC 62386-102, IEC 62386-207, this DALI driver is compatible with most DALI systems in the market. The Triac dimming driver can be compatible with universal Triac dimmers. While selecting 0/1-10V interface, it is compatible with universal 0/1-10V dimmers.
Driver LC 45W 1050mA fixC SR SNC2 45W 87500771 TRIDONIC
AED0.00
essence series
Product description
- Independent driver with strain-relief housing
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- Output current 1,050 mA
- Nominal lifetime up to 50,000 h
- 5 years guarantee
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS
