OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
FOR TRAVELERS
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
4 Channels DALI Phase Dimmer 70040042 SR-2303AC-4CH-DIN
* Pricing Available upon Request *
Product Description
The SR-2303AC-4CH-DIN is a DALI + Push phase cut dimmer designed with 100-240VAC input and 100-240VAC output and safe and reliable full isolation design to control phase cut dimmable LED lamps, traditional incandescent and halogen lights. It is also compatible with universal phase cut dimmable LED drivers. The DALI phase dimmer is designed with DALI control interface with digital numeric digital display to set and show DALI address freely. The AC dimmer adopts trailing edge dimming (reverse-phase control) and comes with 4 channels and maximum 1.8A per channel output. 1/2/3/4 DALI addresses can be settable to control 4 output channels synchronously or separately. The innovative minimum brightness setting function enables users to set a minimum brightness and dim from this minimum brightness to 100% brightness. Also it is easy to delete the minimum brightness. The DALI phase dimmer can be compatible with universal DALI systems.
It is designed with DIN rail installation style, and can be easily mounted on standard 35mm DIN rail.
Driver LC 10W 150–400mA bDW SC PRE2 | 28002411
Product description
• NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance) • Dimmable built-in constant current LED driver • Can be either used build-in or independent with clip-on strain-relief (see accessory) • Forms automatically a wireless communication network with up to 250 nodes • Dimming range 1 – 100 % • For luminaires of protection class I and protection class II • Adjustable output current between 150 and 400 mA via ready2mains™ Programmer or I-SELECT 2 plugs • Max. output power 10 W • Up to 82 % efficiency • Power input on stand-by < 0.35 W • Nominal lifetime up to 100,000 h • 5 years guarantee (conditions at www.tridonic.com)Housing properties
• Casing: polycarbonate, white • Type of protection IP20Interfaces
• basicDIM Wireless • ready2mains™ (configuration via mains) • Terminal blocks: 45° push terminalsFunctions
• Adjustable output current in 1-mA-steps (ready2mains™, I-SELECT 2) • Constant light output function (CLO) • Power-up fading at AC • Switch off the Driver with fade2zero • Configurable via ready2mains™ • Service monitor to log certain events • Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) • Suitable for emergency escape lighting systems acc. to EN 50172
SR-2400RB-RGBW(DT8)
* Pricing Available upon Request *
Product Description
The SR-2400RB-RGB is a RGB DT8 DALI rotary master with DALI output for dimming and RGB color adjusting of DALI DT8 devices. It supports dimming commands and DT8 commands and can be compatible with universal DT8 devices. It is a DALI master control unit designed with a built-in DALI power supply with 100-240VAC wide input which can power DALI bus while connected to AC mains. While not connected to AC mains, the rotary dimmer can be powered by DALI bus. The DALI master controller is updated with a standard 4mm diameter rotary axis that is perfect to use in Europe. Each MCU can power up to 50 DALI ECGs with max. 100mA DALI output. Maximum 2 active DALI MCUs powered by AC mains and 2 passive MCUs powered by DALI bus can connect to DALI bus and control up to 100 DALI ECGs for multiple control points. Dimming solutions are easy and reliable, no DALI addressing required. The master controller controls all devices on the circuit through broadcast. Double clicking the knob will switch from dimming to RGB color adjusting. Compatible with common European size accessories, the DALI manual control unit is easy to install.
Driver LCI 35 W 350/500/700/1050 mA TEC C | 87500192
Product description
• Fixed output built-in LED Driver • Constant current LED Driver • Output current 350, 500, 700 or 1,050 mA • Max. output power 35 W • Nominal life-time up to 50,000 h • For luminaires of protection class I and protection class II • Temperature protection as per EN 61347-2-13 C5e • 5-year guarantee (conditions at www.tridonic.com)Properties
• Casing: polycarbonat, white • Type of protection IP20Functions
• Overtemperature protection • Overload protection • Short-circuit protection • No-load protectionLEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS