BUY LED DRIVER
OUR ENGINEERS
REPAIRING
LED Driver Replacement is a difficult process. When an LED fixture fails you need to either purchase a new fixture or replace the driver. In most scenarios it’s the LED driver that needs replacement (LED components have a longer shelf life).
LEDDOMAIN
Lighting
Every LED requires an operating device (ballast). These are called drivers in the linguistic usage. In an LED, current can only flow in one direction (diode). When heated, the current and thus the power consumption in the LED can increase, which leads to further heating. If this is not limited, the LED destroys itself. Preventing this is one of the tasks of the driver.
TRIDONIC 87501147 Driver LC 30W 350-700mA DA SC SNC4
SALE PRODUCTS
Driver LC 15W 300/350mA fixC SC SNC2 15W 87500718 TRIDONIC
AED0.00
essence series
Product description
- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 300 or 350 mA
- Max. output power 15 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
4 Channels DALI DT8 Dimmer with Built-in Master Function SR-2309FA-OLED
AED0.00
* Pricing Available upon Request *
Product Description
Product Description
SR-2309FA-OLED is the world first DALI certified DT8 dimmer with built-in DALI master function and OLED display for visible manual configuration. The LED dimmer is designed with 4 PWM outputs which are controlled via a single DALI address. DT8 color types all in one: Tc, RGBWA, XY+ Tc, RGB+ Tc can be set. It enables to address (00-63) and group (0-15) the dimmer. It enables to predefine and recall total 16 DALI scenes to the dimmer. PWM output frequency can be set from 250Hz-30KHz which ensures ultra smooth color control.
It enables to set a Min. level for dimming between this level to Max. level. Output level and DT8 color can be set manually. DALI default parameters such as fade time, fade rate, power on level, system failure level can be set .
30W DALI LED Driver (Constant Voltage) SRP-2305-24-30CV
AED0.00
* Pricing Available upon Request *
Product Description
This 100W DALI DT8 Dimmable LED Driver is in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011, and compatible with universal DALI masters that support DT8 commands. With built-in DALI2 interface, this DALI DT8 device is controlled via a single DALI address. Moreover, this device is equipped with 2-channel DC 24V constant voltage output and high power factor and efficiency. Its dimming method is PWM, with smooth and deep dimming to 0.1%. Besides, this driver has error report function, and supports DALI DT8 Tc type. Its protection grade is IP20, which is suitable for indoor LED lighting applications, with 5-year warranty.
Universal series DALI dimmer SR-2304B
AED0.00
* Pricing Available upon Request *
Product Description
The DALI Dimmer SR-2304B is a constant voltage dimming controller with 4 channel, 5A per channel output, which complies to standard DALI protocol with 1 DALI address to control 4 channels synchronously. The DALI address can be manually assigned and shown on the numeric digital display or automatically assigned by master controllers. 1-4 DALI addresses can be configurable for 4 channels to work synchronously or separately. 0.1%-100% smooth dimming can be achieved by the DALI dimmer via logarithmic dimming, which is perfect for human's vision. The DALI dimmer can not only be compatible with DALI masters, but also push switch to get dim and switch functions under the situation without DALI signal.
LEDDOMAIN
ALUMINIUM PROFILE MANUFACTURER
The LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover. Rigidly build anodized aluminum material, better heat dissipation, providing great protection for delicate LED strip lights. This kit includes the aluminum led channel, PC Opal diffuser, end caps and mounting clips , pre assembled plug & play connectors . Standard length 1m , 2m , 3m , customization option available as per project requirement .
ABOUT OUR FACTORY
COMPANY HISTORY & FACTS