30W DALI LED Driver (Constant Voltage) SRP-2305-24-30CV
AED0.00
* Pricing Available upon Request *
Product Description
This 100W DALI DT8 Dimmable LED Driver is in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011, and compatible with universal DALI masters that support DT8 commands. With built-in DALI2 interface, this DALI DT8 device is controlled via a single DALI address. Moreover, this device is equipped with 2-channel DC 24V constant voltage output and high power factor and efficiency. Its dimming method is PWM, with smooth and deep dimming to 0.1%. Besides, this driver has error report function, and supports DALI DT8 Tc type. Its protection grade is IP20, which is suitable for indoor LED lighting applications, with 5-year warranty.
Key Features
• 1 channel 24VDC constant voltage output
• In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2.
• Built-in DALI-2/Push interface, DALI DT6 device
• Class Ⅱ power supply, full isolated plastic case
• Built-in active PFC function
• PF > 0.9, Efficiency > 86%
• PWM digital dimming, standard DALI logarithmic dimming curve
• Compliant with Safety Extra Low Voltage standard
• Over load, over temperature protection
• IP20 rating, suitable for indoor LED lighting applications
• 5 years warranty
Wiring Diagram
1. With DALI bus
2. With Push Dim
Related products
Driver LC 60W 24V one4all lp PRE 60W 28003521 TRIDONIC
premium series 24 V – dimmable (IP20) Product description
- NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
- Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
- one4all interface enables different dimming options
- Dimming range 1 to 100 %
- No additional external dimmer is needed
- Suitable for emergency escape lighting systems acc. to EN 50172
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LCBI 10W 350mA PHASE-CUT/1–10V SR 10W 87500274 TRIDONIC
advanced series
- Independent dimmable LED driver
- Constant current LED driver
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- SELV
- Output current 180, 350 or 500 mA
- Output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LCBI 10W 500mA PHASE-CUT/1–10V lp 10W 87500284 TRIDONIC
advanced series
- Dimmable built-in constant current LED driver
- Constant current LED driver
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- SELV
- Output current 180, 350 or 500 mA
- Output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LCO 14W 100–500mA 38V one4all NFC C EXC3 14W 87500707 TRIDONIC
excite NFC outdoor series Product description
- Dimmable built-in constant current LED driver
- Dimming range 5 – 100 % (min. 5 mA)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current adjustable between 100 – 500 mA via NFC, DALI or ready2mains Programmer
- Max. output power 14 W
- Up to 87 % efficiency
- Lowest power input on stand-by < 0.16 W
- Nominal lifetime of 100,000 h and 8 years guarantee
Driver LCU 150W 12V indoor IP20 150W 24166332 TRIDONIC
excite series 12 V – not dimmable (IP20)
- Constant voltage LED driver
- Universal input voltage range
- Constant output voltage
- Nominal lifetime up to 50,000 h (at ta 40 °C with a failure rate ≤ 0.2 % per 1,000 h)
- 5 years guarantee
- Complies with CLASS C from minimum to maximum load range according to EN 61000-3-2
Reviews
There are no reviews yet.