BASIC DIM ILD Controller and Sensor 86459377
AED0.00
Technical data
Dimensions 120 x 30 x 21 mm
W equivalent 2 W
Warranty 5 years
Protection IP20
Max wiring dist 100 m
Max casing temp tc 75 °C
Operating temp. tp 0 .. +60 °C
Supply voltage 220-240 V
Control signal/Interface DSI/DALI
Description
Product Description
lux CONTROL for v engine LLE With its compact dimensions the new basic DIM ILD controller is ideal for installation in floor-standing luminaires. The associated sensor provides control options based on daylight, presence
detection or remote control.
Reviews (0)
Shipping & Delivery
Data Sheets
Leaflet_TALEXXengine_STARK_LLE_ENRelated products
Driver LC 21W 400–515mA 0-10V fixC lp SNC UNV 21W 87500902 TRIDONIC
Linear essence series (US applications)
Product description
- Constant current LED driver
- Only for US applications
- Dimmable via 0 ... 10 V
- Dimming range 10 to 100 %
- Class 2
- FCC Part 15
- Meets UL 8750 SF3.1
- Meets DesignLights Consortium 4.3
- Temperature protection as per UL8750/UL Recognized
- Adjustable output current 400 or 515 mA
- Max. output power 21 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LC 75W 250–550mA 1-10V lp EXC 75W 28001982 TRIDONIC
excite 1–10V non-SELV series
Product description
- Constant current LED driver for luminaire installation
- Dimmable via 1 ... 10 V interface
- Dimming range 10 – 100 % (Depending on load, for details refer to chapter 4.7 Dimming in data sheet.)
- For luminaires of protection class I and protection class II
- Adjustable output current between 250 and 550 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 75 W
- Up to 94 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LCA 75W 350–1050mA one4all lp PRE 75W 28000659 TRIDONIC
premium series non-SELV
Product description- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 350 – 1,050 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
- Max. output power 75 W
- Up to 92 % efficiency
- Power input on stand-by < 0.16 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LCA 75W 900–1800mA one4all lp PRE 75W 28000660 TRIDONIC
premium series SELV
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 900 – 1,800 mA
- Max. output power 75 W
- Up to 91 % efficiency
- Power input on stand-by < 0.15 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LCBI 10W 500mA PHASE-CUT/1–10V lp 10W 87500284 TRIDONIC
advanced series
Product description
- Dimmable built-in constant current LED driver
- Constant current LED driver
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- SELV
- Output current 180, 350 or 500 mA
- Output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LCU 150W 12V indoor IP20 150W 24166332 TRIDONIC
excite series 12 V – not dimmable (IP20)
Product description
- Constant voltage LED driver
- Universal input voltage range
- Constant output voltage
- Nominal lifetime up to 50,000 h (at ta 40 °C with a failure rate ≤ 0.2 % per 1,000 h)
- 5 years guarantee
- Complies with CLASS C from minimum to maximum load range according to EN 61000-3-2
Reviews
There are no reviews yet.