Driver LC 10W 500mA fixC SC SNC2 10W 87500797 TRIDONIC
AED0.00
essence series
Product description
- Fixed output LED driver
- Can be either used built-in or independent with clip-on strain-relief (see accessory)
- Independent LED driver with cable clamps
- Constant current LED driver
- For luminaires of protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current 250, 350, 500 or 700 mA
- Max. output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Description
Housing properties
- Casing: polycarbonate, white
- Type of protection IP20
Functions
- Overload protection
- Short-circuit protection
- No-load protection
- Burst protection voltage 1 kV
- Surge protection voltage 0.5 kV (L to N)
- Surge protection voltage 1 kV (L/N to earth)
Typical applications
- For spot light and downlight in retail and hospitality applications
- For panel light and area light in office and education application
Reviews (0)
Shipping & Delivery
Data Sheets
Related products
Driver LC 21W 400–515mA 0-10V fixC lp SNC UNV 21W 87500902 TRIDONIC
Linear essence series (US applications)
Product description
- Constant current LED driver
- Only for US applications
- Dimmable via 0 ... 10 V
- Dimming range 10 to 100 %
- Class 2
- FCC Part 15
- Meets UL 8750 SF3.1
- Meets DesignLights Consortium 4.3
- Temperature protection as per UL8750/UL Recognized
- Adjustable output current 400 or 515 mA
- Max. output power 21 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LCBI 10W 180mA PHASE-CUT/1–10V SR 10W 87500273 TRIDONIC
advanced series
Product description
- Independent dimmable LED driver
- Constant current LED driver
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- SELV
- Output current 180, 350 or 500 mA
- Output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LCBI 20W 500mA PHASE-CUT/1–10V SR 20W 87500277 TRIDONIC
advanced series
Product description
- Independent dimmable LED driver
- Constant current LED driver
- Output current 350 or 500 mA
- Output power 19 W
- Nominal lifetime up to 50,000 h
- SELV
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- 5 years guarantee
Driver LCO 14W 100–500mA 38V one4all NFC C EXC3 14W 87500707 TRIDONIC
excite NFC outdoor series Product description
- Dimmable built-in constant current LED driver
- Dimming range 5 – 100 % (min. 5 mA)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current adjustable between 100 – 500 mA via NFC, DALI or ready2mains Programmer
- Max. output power 14 W
- Up to 87 % efficiency
- Lowest power input on stand-by < 0.16 W
- Nominal lifetime of 100,000 h and 8 years guarantee
Driver LCU 150W 12V indoor IP20 150W 24166332 TRIDONIC
excite series 12 V – not dimmable (IP20)
Product description
- Constant voltage LED driver
- Universal input voltage range
- Constant output voltage
- Nominal lifetime up to 50,000 h (at ta 40 °C with a failure rate ≤ 0.2 % per 1,000 h)
- 5 years guarantee
- Complies with CLASS C from minimum to maximum load range according to EN 61000-3-2
Reviews
There are no reviews yet.