Driver LC 8W 200mA fixC SR SNC2 8W 87500800 TRIDONIC
AED0.00
essence series
Product description
- Independent LED driver with cable clamps
- Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- Output current 180 or 200 mA
- Max. output power 8 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Description
Housing properties
- Casing: polycarbonate, white
- Type of protection IP20
- Push-in terminals
- 2 separate strain relief parts for input and output cables with highly robust clamps
Functions
- Overload protection
- Short-circuit protection
- No-load protection
- No output current overshoot at mains on/off
- Burst protection voltage 1 kV
- Surge protection voltage 0.5 kV (L to N)
- Surge protection voltage 1 kV (L/N to earth)
Typical applications
- For spot light and downlight in retail and hospitality applications
- For panel light and area light in office and education application
Reviews (0)
Shipping & Delivery
Data Sheets
Related products
Driver LCA 35W 150–700mA one4all lp PRE 35W 28000654 TRIDONIC
premium series SELV
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 150 – 700 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
- Max. output power 35 W
- Up to 88 % efficiency
- Power input on stand-by < 0.2 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LCA 50W 350–1050mA one4all lp PRE 50W 28000656 TRIDONIC
premium series SELV
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Output current adjustable between 350 – 1,050 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
- Max. output power 50 W
- Up to 91 % efficiency
- Power input on stand-by < 0.15 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LCA 75W 100–400mA one4all lp PRE 75W 28000657 TRIDONIC
premium series non-SELV
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Dimmable built-in constant current LED driver
- Output current adjustable between 100 – 400 mA
- Dimming range 1 to 100 %
- For luminaires of protection class I and protection class II
- Max. output power 75 W
- Up to 92 % efficiency
- Power input on stand-by < 0.15 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LCO 14W 100–500mA 38V one4all NFC C EXC3 14W 87500707 TRIDONIC
excite NFC outdoor series
Product description
- Dimmable built-in constant current LED driver
- Dimming range 5 – 100 % (min. 5 mA)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Output current adjustable between 100 – 500 mA via NFC, DALI or ready2mains Programmer
- Max. output power 14 W
- Up to 87 % efficiency
- Lowest power input on stand-by < 0.16 W
- Nominal lifetime of 100,000 h and 8 years guarantee
Driver LCU 150W 12V indoor IP20 150W 24166332 TRIDONIC
excite series 12 V – not dimmable (IP20)
Product description
- Constant voltage LED driver
- Universal input voltage range
- Constant output voltage
- Nominal lifetime up to 50,000 h (at ta 40 °C with a failure rate ≤ 0.2 % per 1,000 h)
- 5 years guarantee
- Complies with CLASS C from minimum to maximum load range according to EN 61000-3-2
LED DOMAIN
TRIDONIC
VOSSLOH SCHWABE
CASAMBI
Reviews
There are no reviews yet.