ETi DALI 75/220 240/500 D LT2 L
AED0.00
Line frequency: 0 Hz | 50 Hz | 60 Hz
_ Versatile scope of application due to output power range of
up to 75 W
_ Supply voltage: 220…240 V
_ Available with output current range: up to 500 mA
_ Non-isolated drivers
Versatile non-isolated DALI driver up to 75 W due to flexible output characteristic
_ Fully programmable via software (DALI Interface)
_ Flexible current setting (RSet)
_ Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
_ High-quality dimming of 10…100 % by amplitude dimming
_ No TouchDIM nor Corridor Function
_ High quality of light thanks to <4% output ripple current
_ High efficiency
_ Low standby power consumption: < 0.25 W
_ Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Related products
Driver LC 60W 24V one4all lp PRE 60W 28003521 TRIDONIC
premium series 24 V – dimmable (IP20) Product description
- NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
- Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
- one4all interface enables different dimming options
- Dimming range 1 to 100 %
- No additional external dimmer is needed
- Suitable for emergency escape lighting systems acc. to EN 50172
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LC 75W 250–550mA 1-10V lp EXC 75W 28001982 TRIDONIC
excite 1–10V non-SELV series
- Constant current LED driver for luminaire installation
- Dimmable via 1 ... 10 V interface
- Dimming range 10 – 100 % (Depending on load, for details refer to chapter 4.7 Dimming in data sheet.)
- For luminaires of protection class I and protection class II
- Adjustable output current between 250 and 550 mA via ready2mains Programmer or I-SELECT 2 plugs
- Max. output power 75 W
- Up to 94 % efficiency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Driver LCA 100W 24V one4all lp PRE 100W 28001436 TRIDONIC
premium series 24 V – dimmable (IP20)
- NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
- Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
- One4all interface and ready2mains enable different dimming options
- Dimming range 1 to 100 %
- No additional external dimmer is needed
- Suitable for emergency escape lighting systems acc. to EN 50172
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LCBI 10W 350mA PHASE-CUT/1–10V SR 10W 87500274 TRIDONIC
advanced series
- Independent dimmable LED driver
- Constant current LED driver
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
- Temperature protection as per EN 61347-2-13 C5e
- SELV
- Output current 180, 350 or 500 mA
- Output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LCBI 10W 500mA PHASE-CUT/1–10V lp 10W 87500284 TRIDONIC
advanced series
- Dimmable built-in constant current LED driver
- Constant current LED driver
- Dimmable via leading edge and trailing edge phase dimmers
- Dimmable via 1 ... 10 V
- Output dimmed analogue (current amplitude)
- Dimming range typ. 10 to 100 % (depending on dimmer)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- SELV
- Output current 180, 350 or 500 mA
- Output power 10 W
- Nominal lifetime up to 50,000 h
- 5 years guarantee
Driver LCU 150W 12V indoor IP20 150W 24166332 TRIDONIC
excite series 12 V – not dimmable (IP20)
- Constant voltage LED driver
- Universal input voltage range
- Constant output voltage
- Nominal lifetime up to 50,000 h (at ta 40 °C with a failure rate ≤ 0.2 % per 1,000 h)
- 5 years guarantee
- Complies with CLASS C from minimum to maximum load range according to EN 61000-3-2
Reviews
There are no reviews yet.